In-Situ Tests

When you click on 'add' you will be presented with the Sample Type window. To add a 'test' click, for example, 'SPT'. You will then be prompted to enter the start depth for the test. You can click 'ground level' for ground level

You can now add the casing depth and water level if required.

The SPT window will now appear. Enter the seating blows and then enter the test blows. DrillIt Logs will record how many blows you have entered! The image below shows a successful SPT under 50 blows

When you click 'update' the details of the test are calculated (ie the end depth) and you can then update the sheet. A 'D' sample will be automatically recorded and you will be prompted if you want to print the label.

If the SPT has a refusal, ie more than 50 blows, you will be prompted to enter the final refusal in mm. The final depth of the test is recalculated to that depth. Again, a 'D' sample will be automatically record and you will be prompted if you want to print the label.

U100/UT100

When you add a U100 or UT100 test, you will first be prompted to add the Start depth, the casing depth and water depth if any. You will then be prompted to enter the number of blows during the test and finally, the percentage recovered:

When you click 'update' the details of the test are calculated (ie the end depth) and you can then update the sheet. You will be prompted if you want to print the label. A 'D' sample will be automatically recorded for the sample captured in the shoe!